Corotech Industrial Coatings

 

Check out below just a small hand full of products we carry in-stock from Corotech.

V160 Epoxy Mastic 
Insl-X Industrial Coatings COROTECH® V160 Surface Tolerant Epoxy Mastic is a high solids, surface tolerant epoxy formulated for professional use in industrial applications. This product is excellent for use on ferrous and non-ferrous metals, and when properly top-coated, exhibits excellent chemical and moisture resistance. Resists solvents, dilute acids and alkali attack. Is suitable for use for protecting concrete substrates in secondary containment applications and can be used for immersion applications. Additionally, this primer is formulated to offer long-term rust prevention, and is excellent when used in a system with epoxy intermediates, immersion service epoxies, and other high performance topcoats. Available in White and Bases.  BUY NOW.

 

V400 Polyamide Epoxy
Insl-X Industrial Coatings COROTECH® V400 Polyamide Epoxy is designed for use in Food and Beverage Processing, Industrial Maintenance, General Metal Finishing and Fabrication, Chemical Processing, Industrial and Commercial Flooring and other areas requiring maximum impact and abrasion resistance. It’s highly cross-linked film resists many chemicals and solvents, and exhibits excellent chemical and moisture resistance. It is resistant to dilute acids and alkali attack and does not support the growth of mold, fungi or other micro-organisms. This product is excellent for use on ferrous and non-ferrous metals. It is also suitable for protecting concrete substrates in secondary containment applications and can be used for immersion and floor applications. Additionally, this primer is formulated to offer long-term rust prevention, and is excellent when used in a system with epoxy intermediates, immersion service epoxies, and other high performance topcoats. Available in White, Safety Colors, various ready mixed colors and a full range of tint bases. This line is available in both gloss and semi-gloss finishes.

 

V440 Waterborne Amine Epoxy
Insl-X Industrial Coatings COROTECH® V440 Waterborne Amine Epoxy is formulated to provide superior chemical, abrasion and impact resistance when compared to most conventional waterborne epoxies. The highly cross-linked film provides years of service in industrial and commercial applications and is particularly suited for use on concrete floors subjected to severe service conditions. The waterborne formulation produces lower odor than solvent based epoxies, so this product may be applied in occupied areas, and is more user friendly than solvent based polyamide epoxies. Additionally, this product may be applied to most generic coating types without the fear of lifting or wrinkling. Available in Clear, White, 4 Ready Mixed Colors and a full line of Tint Bases. This product is suitable for use in USDA inspected facilities.  BUY NOW.

 

V157 Coal Tar Epoxy
Insl-X Industrial Coatings V157 Coal Tar Epoxy is a high solids, two component tar filled coating formulated to provide excellent film build in one or two coats. The high level of cross-linking provides an excellent barrier coat for immersion service in fresh water, salt water or waste water. Additionally, this product is resistant to many acids, alkalis and mild solvents in splash and spill exposures. The high build of this product provides an excellent non-conductive film for use between dissimilar metals. This product may be applied direct to prepared ferrous metal and concrete, however, a primer is recommended for maximum life expectancy.  BUY NOW.

 

V180 Rust Arrestor
Insl-X Industrial Coatings Corotech Rust Arrestor is a water based film forming primer that chemically transforms rust into a stable iron complex, thus stopping the rusting process. It may be top-coated with latex, alkyd, urethane or epoxy finishes. When Rust Arrestor is applied over tight adhering rusted surfaces, the film turns to a tight, black protective film. Note: There must be rust present for this product to work properly.  BUY NOW.

 

V155 100% Solids Pre-Prime Epoxy
Insl-X Industrial Coatings 100% Solids Epoxy Pre-Primer is a two component penetrating epoxy sealer. This product is formulated for use on clean, rusted steel where extensive surface preparation is needed, but not possible. The penetrating properties and extended dry time of V155 provides a method of reinforcing rusty steel surfaces, ensuring adhesion of subsequent coatings. This product also exhibits excellent penetration and sealing of masonry and wood substrates. Can also be used as a barrier coat when applying high performance coating systems over existing alkyd coatings. Pre-Primer will amber and chalk if exposed to ultraviolet light. This product is suitable for use in USDA inspected facilities.

 

V170 Organic Zinc Rich Primer
Insl-X Industrial Coatings Corotech Organic Zinc Rich Primer is a heavy-duty corrosion inhibiting primer designed for use on ferrous metal in industrial applications. The dried film of this product contains 83.4% zinc. Additionally, weathered galvanized metal may be brought back to its’ original cathodic protection by using this product. The organic resin used in this product may be left untopcoated or may be finished with a variety of finishes. Note: Due to the thermoplastic resin used, certain finishes will require a tie coat of V110 Acrylic Primer prior to finish coat application.

 

V175 Waterborne Bonding Primer
Insl-X Industrial Coatings Corotech Waterborne Bonding Primeris a one-component bonding primer that may also be used as a rust inhibitive universal primer. This product bonds to various metals creating a solid foundation for finishing coats. This product may be finish coated with a wide variety of coatings including alkyds, acrylics, epoxies, urethanes and moisture cured urethanes. Because of it’s versatility on all metals, Waterborne Bonding Primer will replace traditional wash coat primers and offers a safer to use alternative for all projects. This product is a high performance coating specifically designed for application directly to ferrous and non-ferrous metal substrates. It provides corrosion resistance as well as primary adhesion. It will tightly bond to Steel, Chrome, Brass, Copper, Aluminum, Galvanized Metal, Stainless Steel [when used on stainless steel or cold rolled steel, it is imperative that there be a surface profile of at least 1 mil and that it be jagged in nature]. It may be left uncoated for up to 3 months at 77°F prior to finish coating in interior applications. In exterior applications, if more than 2 weeks elapse, the primer film should be cleaned to remove any chalk that may have formed. This product is lead and chromate free.  BUY NOW.

 

V110 Acrylic DTM Metal Primer
Insl-X Industrial Coatings V110 Waterborne DTM Metal Primer is a water-reducible, rust inhibitive primer formulated for use on steel, iron, and non-ferrous metals. The product provides excellent adhesion to a wide variety of hard to coat surfaces. Designed for light to moderate industrial exposures, this product may be top coated with a wide variety of coating chemistries. Additionally, this product may be applied to properly prepared steel as well as tightly adhering rust. The low odor characteristics and water-based formulation makes this an ideal choice for use in occupied areas. This product may also be used as a flat finish coating.  BUY NOW.

 

V142 Shop Primer
Insl-X Industrial Coatings Corotech Shop Primer is formulated for those users who require an economical primer for commercial use in mild to moderate exposures. Shop Primer is ideal as a temporary transport coat on fabricated pieces that will ne blasted at the job site and recoated or as an economical barrier primer; or left un-coated in interior noncorrosive environments. These primers may be top-coated with a wide variety of finishes. However, finishes containing strong solvents (Ketones, Xylene, Toluene) may cause wrinkling or lifting of these primers.

 

V133 Alkyd Shop Cote Primer
Insl-X Industrial Coatings Corotech Shop Cote Metal Primer is formulated for use in mild to moderate atmospheric exposures, where a quick turn-around economical primer is desired. This primer provides barrier protection on properly prepared surfaces, and may be top-coated with a variety of finishes. Shop-Cote Primer is ideal as a temporary transport coat on fabricated pieces that will be blasted at the job site and recoated or as an economical barrier primer or left un-coated in interior noncorrosive environments. Available in Red & Light Gray only. This product is suitable for USDA inspected facilities.
V131 Universal Metal Primer
Insl-X Industrial Coatings Corotech Low VOC Universal Metal Primer is a high performance, one component, quick dry, rust inhibitive metal primer, formulated for use on ferrous metal substrates. The phenolic alkyd resin formulation allows for a wide variety of intermediate and finish coats. The quick dry and recoat times allow for fast turn-around of production work. The barrier protection that this product provides, as well as the rust inhibitive pigmentation, leaves a film that prevents corrosion for many years. Additionally, this product may be used as a tie coat over existing coatings that will be finished with a high performance coating. It provides corrosion resistance for both interior and exterior steel surfaces. Not recommended for non-ferrous metals such as galvanized, aluminum or for use in immersion service. May be applied to new or properly prepared rusted surfaces.

Available in White, Red, or Gray. This product is suitable for use in USDA inspected facilities.  BUY NOW.

 

V331 Acrylic Semi-Gloss DTM Enamel
Insl-X Industrial Coatings Corotech Acrylic Semi-Gloss DTM is a high performance, one component, direct to metal acrylic finish formulated for application to a wide variety of metals and other substrates, either direct or as a UV resistant finish applied over primer. The coating performs very well in light to moderate industrial exposures, and is ideal for commercial and institutional applications. This product out performs most “DTM” systems on the market, having far superior resistance to moisture throughout the coating life. Additionally, the product is formulated with special inhibitors, which prevent flash rusting when applied to ferrous metals, and provides long term corrosion prevention throughout the coating life. The waterborne formulation ensures easy application, clean-up and use in occupied areas.  BUY NOW.

 

V330 Acrylic Gloss DTM Enamel
Insl-X Industrial Coatings

Corotech Acrylic Gloss DTM is a high performance, one component, direct to metal acrylic finish formulated for application to a wide variety of metals and other substrates, either direct or as a UV resistant finish applied over primer. The coating performs very well in light to moderate industrial exposures, and is ideal for commercial and institutional applications. This product out performs most “DTM” systems on the market, having far superior resistance to moisture throughout the coating life. Additionally, the product is formulated with special inhibitors, which prevent flash rusting when applied to ferrous metals, and provides long term corrosion prevention throughout the coating life. The waterborne formulation ensures easy application, clean-up and use in occupied areas. Available in White, bases and select colors.  BUY NOW.

 

V500 Aliphatic Urethane Gloss
Insl-X Industrial Coatings

COROTECH® V500 Aliphatic Acrylic Urethane is a multi-use, two-component low VOC Aliphatic Acrylic Polyurethane that provides excellent gloss and color retention, as well as excellent abrasion, chemical, and solvent resistance. It may be used anywhere a performance urethane is necessary for interior or exterior applications. This product is ideal as a non-sacrificial anti-graffiti coating in clear or pigmented colors when using a commercial Graffiti Remover. Complies with or surpasses formulation and performance requirements of MIL-C-85285. Suitable for use in USDA inspected facilities.

 

V510 Aliphatic Urethane Semi-Gloss
Insl-X Industrial Coatings

COROTECH® V510 Aliphatic Acrylic Urethane is a multi-use, two-component low VOC Aliphatic Acrylic Polyurethane that provides excellent gloss and color retention, as well as excellent abrasion, chemical, and solvent resistance. It may be used anywhere a performance urethane is necessary for interior or exterior applications. This product is ideal as a non-sacrificial anti-graffiti coating in clear or pigmented colors when using a commercial Graffiti Remover. Complies with or surpasses formulation and performance requirements of MIL-C-85285. Suitable for use in USDA inspected facilities.

 

V520 Polyester Urethane
Insl-X Industrial Coatings

COROTECH® V520 Polyester Urethane is a high performance, two-component polyester polyurethane formulated to provide excellent gloss and color retention on exterior substrates, as well as excellent abrasion, chemical, and solvent resistance in industrial applications. Available in Tintable White and a line of Tint Bases. This product is suitable for use in USDA inspected facilities.

 

V600 Oil & Grease Emulsifier
Insl-X Industrial Coatings

Corotech Oil & Grease Emulsifieris designed for cleaning walls, floors and equipment. This cleaner is extremely effective in removing oil, grease, fats, blood and animal by-products. It may also be used for cleaning concrete, asphalt, vinyl, metal, plastic, fiberglass, etc.; it is also very effective for cleaning equipment, tools, brushes, rollers and spray equipment. The emulsifying action of Corotech Oil & Grease Emulsifier lifts oil and grease out of voids, cracks and crevices then converts this oil matter into a soapy solution.It then can be easily rinsed away with clean water.Corotech Oil & Grease Emulsifier should be mixed with water before use, 6 parts water to 1 part emulsifier for heaving cleaning requirements and 15 parts water to 1 part emulsifier for light cleaning.A mixed gallon will clean approximately 100 square feet of area.Pour the water and emulsifier mixture onto the surface to be cleaned. Allow this solution to work for 15 to 30 minutes then scrub the surface with a stiff bristled brush.Rinse thoroughly with clean water or pick up residue with a wet/dry vacuum.

Repeat the cleaning procedure if necessary.  BUY NOW.

 

.....  

Our Industrial Coatings

© Southern Paint & Supply | design by BIGEYE

Find us on FaceBook
Find us on Twitter
Find us on Instagram
Find us on Pintrest
Find us on YouTube